Non mandrel CNC Bending machine CC60 CNC

Product Description

• Maximum size on S275 round steel pipe: 60.3 mm or 2ï Schedule-40 or 2ï 1/4x 4 mm.
• Maximum size on aluminum pipe: 60.3 mm x 8 mm / 2.375ï x .315
• Maximum size on stainless steel pipe 304 / 316: 60.3 mm x 3 mm / 2.375ï x .160
• Maximum size on square tube: 40 x 40 x 4 mm / 1.50ï x 1.50ï x .160ï
• Maximum angle of curvature: 180
• Minimum radius of curvature: 3 times the pipe diameter.
• Maximum radius of curvature: 320 mm
• Automatic rotation speed from 1,1up 3,5 rpm
• Repetition on the curve of +/- 0.1 degrees
• Reinforcement tool post support arm for pipes with diameters over 40 mm included.
• 400 ml BEND 8 lubricant included.
• Two bending directions, right or left for easier bending.
• Quick die change over: Maximum 60 seconds.
• 4.0 Technology
• CNC control with 7ï touchscreen with more than 20 different languages
• Safety pedal to the right and left.
• Side shelving to store tools.
• All bend dies are made of tempered steel for longer tool life.
• The counter dies are made of bronze alloys to help prevent markings on the outside of the bent profiles.
• Stores up to 10,000 programs.
• Up to 50 different angles on the same piece can be programmed.
• Dimensions can be programmed in inches or millimeters.
• Pivot system with automatic unlocking to help remove material.
• Automatic and programmable spring back correction.
• Automatic unlocking
• Automatic and programmable springback
• Offset head for complex parts.
• Reinforcement tool post support included
• Packaging included
• Motor power:1.1 KW / 1.5 HP.
• Electrical voltage:230V single phase 50/60Hz
• Optional voltage: 110V single phase 50/60Hz
• Intensity:5 A
• Machine weight:365 Kg / 805 Ibs
• A lower pallet bench to transport the machine to the worksite or storage.
• The CC60 pipe bender is sent completely assembled.
• An wooden pallet and 3-layer cardboard box suitable for seafreight.
• Optional: NIMF15 wooden container.
• All capacities are based on the norm of carbon steel tubes according to ASTM, Standard A-53 grade A with a maximum resistance strength of 330MPa. The walls with more thickness to the established one and the materials with more resistance, reduce the capacities of the machine. Check with your material supplier for the specifications of this one.